Kafuter 250ml K-0680 cylindrical retaining compound bearing repair high intensity anaerobic green | Sealers

Kafuter 250ml K-0680 cylindrical retaining compound bearing repair high intensity anaerobic green | Sealers

Brand NameNoneModel NumberK-0680TypeSealersis_customizedYesDIY SuppliesELECTRICALMeasurement unitpiece/piecesEach pack1Appearance green liquidUsageConstruction, Fiber & Garment, TransportationMain Raw MaterialmethacrylateClassificationOther AdhesivesIntensityhigh strengthMax Gap Filling0.25mmViscosity1000~3000 mpa3 210,13 ₽3 210,13 ₽Add to CartBuy now3 210,13 ₽

Delivery to Moskva g

Delivery to a Post office

Self-pickup

Description

Kafuter 250ml K-0680 cylindrical retaining compound bearing repair high intensity anaerobic green 

Product Features

K-0680 (Universal / high-strength retaining compound cylindrical) is a one-component, high strength, general purpose, anaerobic cylinder bore viscosity / shaft fitting retaining compound. The cylindrical retaining compound cured and air separation between two close fitting metal.

Typical use

The cylindrical retaining compound for radial clearance gap ≤0.25mm fit or transition fit, best fit clearance 0.05 ~ 0.10mm. Can replace press fit, anti-corrosion. Typical uses: slightly worn bearings, bushings and other assembly, holding pulleys, bushings, gears, rotors, repair the hole - and shaft fitting-tolerance parts.

Nature of the product

Chemical composition methacrylate

Appearance Green viscous liquid

Viscosity (25 , mPa.s): 1000 ~ 3000

Specific gravity: 1.05 to 1.10

The maximum radial gap filling (mm): 0.25

Shear strength (MPa): ≥10

Working Temperature : - 54 ~ 149

First curing time (minutes): ≤15

Full cure (hours): 24

Instructions for use

1. The surface to be coated should be clean, dry and free of grease.

2. For slide fitting is just around the shaft and sleeve lead angle circle painted plastic, turning left and right during assembly to ensure good coverage can be.

3. For press fitted, the bonding surfaces of the two quilts are required to glue painted and assembled at high press.

4. For shrink fitting, the glue should be applied to the shaft, then heating the sleeve assembly to generate enough free space.

5. Parts should not previously reached sufficient strength not to tamper with.

Caution

The cylindrical retaining compound should not be used on plastic parts; in order to avoid contamination of the original glue, do not have poured the glue back to the original packaging.

Safety Precautions

The cylindrical retaining compound containing methyl acrylate, skin and eye irritation. If skin contact, immediately wash with water; if touching the eyes, immediately rinse with water and go to hospital for treatment.

Note: The above data are based on our extensive obtained experimental results are reliable. However, due to the diversity of application conditions of practical application are beyond our control, so users need to be tested before use in order to confirm whether the product is suitable. I have no guarantee that under certain conditions the use of our problem with the product, is not liable for any direct, indirect or incidental damages. Users encounter any problems during use, and can contact our technical service department, we will try to provide you with as much as possible to help.

^{Payment methods}

^{Just feel confident to pay us via the method as below, If you want to pay via other method, please kindly contact us. Your payment is only released to us after you confirm you have received the goods.}

^Shipping

^{The default shipping method is HongKong Post Airmail . Please kindly contact us if you would like to choose, we will tell you how much extra fee you need to pay.}                                                  

^{Import duties: Taxes and other customs related charges are not included in the price. Buyers bear all extra charges incurred (if any),if buyer didn`t buy insurance.}

^{Return policy}

^{Please return the item within 7 days after receiving it if you are not satisfied with it (Buyer assumes return shipping). All returned items must be in the original conditions, please email us first for return address and instructions.}

^{Feedback
Your feedback is very important for us, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. We will give positive feedback to you too.
If there are any problems, please contact us firstly. We will try hard to solve the problem for you.}

^{Enjoy your shopping and have a nice time!}