1 Set Archery Compound Bow With Accessories 30-70lbs 75%Left-off 320fps Powerful Right Hand Outdoor Shooting | Спорт и развлечения

1 Set Archery Compound Bow With Accessories 30-70lbs 75%Left-off 320fps Powerful Right Hand Outdoor Shooting | Спорт и развлечения

1 Set Archery Compound Bow With Bow Accessories 30-70lbs 75%Left-off 320fps Powerful Right Hand Bow Outdoor Shooting Accessories

Description:

• Net Weight:3.9lbs
• Draw Weight:30-70lbs
• IBO UP TO:320fps
• Draw Length:23.5-30.5"
• Axle-to-Axle:30"
• Brace Height:7.4"
• Let-off:70%-75
•  
• Packaging list:

• 1x 5 pin sight with light
• 1x Whisker biscuit style rest
• 1x Bow Rubber stabilizer
• 1x Wrench
• 1x Wrist Release
• 1x Bow Sling and Quick Quiver
• 1x Peep sight and loop come pre-installed
•  
• Features:   -High performance dual cam system -Adjustable draw weight and draw length -Application of rubber damper and string silencer makes the shooting more stable and makes shooting less noisy.

•  
• BOW ASSEMBLY
•   What you get is an adjusted bow, you need to install accessories like arrow rest, sight etc. on the bow before using.

• 2,  Sight Installation

    Install the sights on the bow riser with the screws provided(as shown in the picture2),the screw can be in both hole A and hole B. If assembled on hole B, shooting range will be 5m or so shorter than in A.

  Install the blue night light on the sight(as shown in the picuure3),which can be turned on when light is poor.

•  
• 3,Install the blue night light on the sight(as shown in the picuure3),which can be turned on when light is poor.

   

   

  4.Stabilizer Installation

  Assemble the stabilizer on the specified position of the riser(as shown in the picture4).

• 5.Peak Draw Weight Adjustment(as shown in the picture 5)

   This bow has roughly 30lbs to 70lbs peak weight adjustment range.

  Adjust the draw weight by screwing the bolts on the limbs and riser, turn the bolts clockwise to increase draw weight and counter-clockwise to decrease. PAY ATTENTION to adjust the two bolts equally. The bow you get is with 40-45lbs draw weight, which can be adjusted with steps above.

  Watch Out: Never over tighten or loosen the bolts.

  6,Draw Length Adjustment

   This bow has 12 gears adjustment range(as shown in the picture 6).

  There are 12 two-socket flat head cap screw on each modular cam. You can adjust draw length freely accordingly your stature and arm span. When adjust draw length first loosen the screw in the middle of the cam, press cable by hand to make it leave cam. second move the cam to the correct draw length hole then tighten the screw and loosen the cable.

   

  Screw NO	1	2	3	4	5	6	7	8	9	10	11	12
  Draw length	23.5"	24.1"	24.7"	25.4"	26"	26.7"	27.4"	28"	28.6"	29.3"	29.9"	30.5